About Dr. Loren Pickart’s Patented Skin Remodeling Copper Peptides
If you’re not already familiar with this anti-aging phenomenon, you’ll love us for introducing you to them!
_________________________________________
Copper Peptide products are safe and effective products that help activate the skin’s natural renewal systems to remove the effects of aging and damage on skin and restore it to a younger and healthier condition. The products and recommendations are based on the skin’s natural molecules and remodeling processes. You can expect to start seeing results in as little as 4-6 weeks.
Dr. Loren Pickart’s inventions on methods to repair and regenerate various tissues of the body have been confirmed by independent, published studies from over 40 universities and research centers. His inventions and discoveries have been proven to:
_________________________________________
NANCI RECOMMENDS
The trick to using Copper Peptide and reaping the full benefits of its age reversal abilities is to start slowly – I can’t emphasize this enough. Too often I see over zealous users creating skin problems for themselves by using too much, too soon. It took a long time for your skin to get to the point that it is now so it will take time to repair and reverse any damage, wrinkles, lines, sagging (loss of elasticity), hyperpigmentation (age spots), blemishes, redness, large pores and/or scars.
SO PLEASE START SLOWLY!! Apply a dime-sized amount to face, neck, and décolleté (or just enough to cover your skin). Use once a day at night, avoiding your eye area. Copper Peptide is too strong of an age reversal product for the delicate eye area for most people. Please note: Taking 1,000 mg. of Vitamin C and 1,000 mg. of MSM are going to increase the effectiveness of the Copper Peptide tremendously for firming the skin. If you are using Retin-A, apply your Copper Peptide over your Retin-A. I recommend waiting 20-30 minutes after applying your Retin-A to apply your Retin-A. If your skin isn’t tolerating Retin-A well (peeling, flaking and redness), try mixing your Retin-A and Copper Peptide together. If you use a topical Vitamin C product, apply your Copper Peptide at night and your Vitamin C in the morning.
Use on exfoliated skin for best results; I prefer using the Microfiber Cleansing Cloth or my Pretika Sonic Dermabrasion Machine since they are acid free exfoliation, Formula 5-5-5 Spot Remover and Acid-Free Exfoliating Serum is also perfect for very sensitive skin.
Here are the different strengths of Copper Peptide. For best results and full benefits, please do not move to the next potency until you use at least one entire full size bottle of each:
- Super GHK Cream/Serum,
- Protect & Restore Day Cover
- Protect & Restore With High Retinol
- CP Serum
- Skin Signals Solution (Serum) and Skin Signals Cream
- Super CP Serum
- Super Cop
- Super Cop X2
Once you have graduated to Super Cop, it’s best to mix it with another product or even water. For the first week, mix 50/50, 2nd week mix 60/40 (60 being CP), 3rd week, 70/30 etc, until you are able to use it full strength. This allows your skin to gradually become accustomed to it. The same goes for Super Cop X2.
Also, please remember to take 1,000 mg. of Vitamin C internally on a daily basis. It’s what improves skin elasticity so much. Taking 1,000 mg. of MSM is recommended by Dr. Pickart (and me) since it supplies the nutritional sulfur needed for the production of skin proteins.
_________________________________________
DR. PICKART
I took the following directly from Dr. Pickart’s website. Please note that SRCP = Skin Remodeling Copper Peptides.
To make the products milder, start with biological healing oil.
If the biological healing oils, such as Squalane or Face Oils are used before the SRCPs, this reduces the SRCP affects because the oils penetrate the skin and form an oil barrier that slows SRCP uptake into your skin. This method is often used around the eyes. Healing oils often can be used before SRCPs on irritated or very sensitive skin, such as after laser burns or deep peels.
Hydroxy acids or exfoliation methods increase rebuilding for acne scars and/or stretch marks.
Skin exfoliating increases SRCP effects. They act to loosen the chemical links between older skin cells and allow their removal. This removal of older skin allows your skin cells to move to the surface and speed skin renewal. Abrasive methods (TimePeel Microdermabrasion Machine) also help remove lesions.
Sometimes removing damaged skin causes loosening before tightening and deeply buried scar tissue becomes visible. If the SRCPs are used heavily at first, there may be a brief period of skin loosening – about two weeks – before the skin tightens. Damaged skin can be somewhat like hard scar tissue and this holds everything in place. As this is removed, skin may briefly loosen before it is pulled tight by the production of new collagen and elastin. Skin fibroblasts first produce collagen and elastin, and then the fibroblasts slowly pull the protein strands together and tighten the skin.
Copper Peptide both builds and removes the older damaged collagen which is why using too much can give you the ‘uglies’ which is saggy skin. This results from removing too much collagen before the skin has a chance to rebuild and replace it.
Deeply buried scar tissue is often covered over with normal skin. For example, cystic acne can form hard scars under the skin. These scars often are later are covered over by superficial skin cells. But as skin is exfoliated, this old, buried scar tissue becomes visible. As such deep damage becomes visible, you can focus more usage of SRCPs and the exfoliation.
SUPER COP and SUPER COP 2X-Extra Strength reminders:
Super Cop is a very strong skin remodeling system. We highly recommend starting with a milder product first and then ‘work up’ to using Super Cop. Start very lightly, using once a day. This product is excellent for rapid skin rebuilding.
Start Using SRCP Products Slowly and Avoid Overuse:
We get spectacular reports from around the world by those who have used our products. However, it is of note that many of the best reports come from those who have been using the products for some time and have gradually worked up to be able to use the stronger products. When using SRCPs (especially around the eye area) it is vital to start very slowly and carefully avoid overuse. Since at times the products can seem very easy to use without any irritation, the tendency can be to apply much more than what is needed. Overuse is very possible with these products. Signs of overuse can manifest itself through temporary irritation, inflammation, droopiness, looseness, dryness, or any other unwanted effect.
If this occurs, use less product or rest your skin from SRCP products until this goes away. Once that occurs and you start the SRCPs again, use much less and perhaps slowly start back using them even every other day rather than every day.
This can be easily avoided by first using milder products applied lightly and gradually stepping up to the stronger SRCP products.
How to “Rest the Skin” and when to do it:
If you notice any temporary increase in loose skin, especially around the eye area, or any puffiness – Effectively rest the skin by using only a biological healing oil such as Squalane or CP Accelerator which contains DMAE (the DMAE** – dimethylaminoethanol is an antioxidant membrane stabilizer, and helps to tighten the area and usually is based in a biological oil as well). DNA Serum is an excellent choice as well and may be the key to the end of the “uglies”!
Super Cop
Nanci Callahan Nivolo
